Product Overview

 

The Industrial Cartridge Dust Collector is an air filtration system designed to capture airborne dust generated during powder processing, bulk material handling, and industrial production. It can be configured for applications such as pneumatic conveying, mixing, screening, weighing, silo venting, and bulk bag filling.
The system uses pleated filter cartridges to separate dust from the process air. Dust accumulates on the filter media, while filtered air passes into the clean-air chamber. An automatic pulse-jet cleaning system uses compressed air to dislodge accumulated dust from the cartridges, allowing the released material to fall into the collection hopper.
Compared with traditional filter bags, pleated cartridges provide a larger filtration area within a compact housing, depending on the selected cartridge design and equipment configuration. The appropriate collector size, filter media, cleaning settings, and discharge arrangement depend on airflow requirements, dust characteristics, operating conditions, and installation constraints.
The collector can be configured for integration with existing dust extraction systems or supplied as part of a powder handling process, subject to engineering review.

 

 
  • Cartridge Dust Collector
    The Cartridge Dust Collector (standard pulse jet cleaning, with custom side spray/backflush cleaning options) is a high-efficiency, compact dry purification device specifically designed for...
    view more
  • Mobile Cartridge Dust Collector
    The Mobile Cartridge Dust Collector (standard pulse-type, with support for customized side-spray cleaning) is a mobile, efficient, and compact dry purification device specifically designed for the...
    view more
 
 
Key Features & Benefits
 
01/

Pleated Cartridge Filtration
Pleated filter cartridges provide an extended filtration surface within a compact housing. Cartridge dimensions, media construction, and total filtration area can be selected according to the required airflow and dust characteristics.

02/

Automatic Pulse-Jet Cleaning
A compressed-air cleaning system releases timed pulses through blow pipes and nozzles to remove accumulated dust from the filter media. Cleaning can be controlled by a timer or differential pressure controller, depending on the selected configuration.

03/

Filter Media Options
Available media options include polyester, nanofiber-treated polyester, PTFE membrane media, and antistatic conductive media, subject to the product configuration. Media selection accounts for particle size, dust loading, operating temperature, humidity, chemical compatibility, and electrostatic requirements.

04/

Configurable Airflow and Filtration Area
Airflow capacity and filtration area are selected according to extraction points, system resistance, dust concentration, and operating conditions. Multiple collection modules are utilized when a single unit cannot meet required system capacity.

05/

Flexible Dust Discharge
The collection hopper can be configured for connection to compatible discharge equipment, such as rotary airlocks, slide gates, or other material handling devices, subject to required interface dimensions.

06/

Industrial Housing Construction
Housings are manufactured from carbon steel or selected stainless steel grades. Plate thickness, internal reinforcement, sealing arrangements, and surface finishes are specified according to equipment design and operating requirements.

 

Working Principle

Dust-Laden Air Inlet

Dust-laden air enters the collector through the inlet duct or transition section connected to process equipment. An internal baffle or settling section allows heavy particles to separate from the airflow before reaching the filter cartridges.

Filtration Through Cartridge Media

Air passes radially inward through the cartridge filter media, retaining airborne particles on the dust-facing exterior surface while clean air enters the interior core.

 

Clean-Air Discharge

Filtered air enters the clean-air chamber and is routed to an exhaust fan, ventilation system, or secondary filtration stage, depending on system design.

 

Pulse-Jet Cleaning

Compressed air is released through blow pipes and nozzles to generate short cleaning pulses inside the cartridges. The resulting pressure change dislodges accumulated dust, which falls into the collection hopper.

 

 

Applications

Pneumatic Conveying and Silo Venting
Collects dust-laden air from conveying receivers, blow tanks, storage silos, and transfer points, accounting for displaced air during filling and conveying operations.


Powder Processing and Bulk Material Handling
Provides dust extraction during mechanical mixing, blending, screening, sizing, and micronizing of raw powders.


Weighing and Batching Stations
Integrates with ingredient dumping points, scale hoppers, and batching equipment to capture fugitive dust during material charging.


Packaging and Filling Lines
Manages dust containment at bulk bag (FIBC) filling stations, bag opening areas, and compatible valve bag packing equipment.


Industrial Dust Extraction Systems
Incorporates into centralized dust collection systems serving multiple extraction points, with evaluation of ductwork layout, pressure losses, and fan selection.

Cartridge Dust Collector

 

Technical Specifications

 

Parameter

Specification / Selection Basis

Equipment Type

Industrial pulse-jet cartridge dust collector

Airflow Capacity

Model-specific; determined by extraction requirements and system resistance

Total Filtration Area

Selected according to airflow, dust loading, media, and operating conditions

Filter Cartridge Quantity

Model- and configuration-dependent

Filter Media

Polyester, nanofiber-treated polyester, PTFE membrane, or antistatic media

Filtration Efficiency

High-efficiency rating on fine particulate down to sub-micron levels

Housing Construction

Carbon steel; optional 304 / 316 stainless steel grades

Design Negative Pressure

Engineered to withstand continuous system negative pressure

Operating Pressure Drop

Initial clean: 500 to 750 Pa

Compressed Air Pressure

60 to 90 PSI (clean, dry, oil-free instrument air)

Cleaning Control

Timer-based or differential pressure-based controllers with NEMA / IP enclosures

Electrical Supply

Standard industrial 3-phase power configurations

Dust Discharge

Hopper outlet configured for compatible discharge equipment

Surface Finish

Industrial epoxy powder coat inside and out, corrosion-resistant primer

 

Customization and Manufacturing Quality
 

Customization Capabilities
Housing Material and Finish
Carbon steel and selected stainless steel grades specified according to application requirements. For food, pharmaceutical, or fine chemical applications, surface finish, weld treatment, and cleanability are customized to match process standards.
Filter Media Selection
Media options evaluated and matched to particle retention, temperature limits, chemical compatibility, moisture levels, and static-control requirements.
Dust Discharge Configuration
Hopper outlets engineered for direct connection to rotary airlocks, slide gates, or flexible discharge spouts based on material flow characteristics.
Layout and Integration
Inlet and outlet positions, service access doors, and overall equipment dimensions reviewed to fit available installation space and existing plant ductwork.
Control System Integration
Electrical interfaces, control signals, voltage, and enclosure protections specified to match site requirements.

 

Manufacturing and Quality Control
Sheet Metal Processing
Laser-cut steel components formed via CNC press brakes to ensure exact dimensional accuracy, squareness, and tight gasket seating surfaces.
Welding and Seam Integrity
Structural and pressure boundary welding performed by certified personnel using continuous MIG/TIG processes.

 

Mobile Cartridge Dust Collector

 

Related Products and Spare Parts

Replacement Filter Cartridges
Cylindrical pleated elements matched to original equipment dimensions, media specifications, and sealing configurations.


Pulse-Jet Solenoid Valves and Diaphragm Kits
Direct-replacement high-response valves and repair kits for cleaning systems.


Differential Pressure Controllers and Gauges
Digital and analog instruments for monitoring filter resistance and supporting maintenance schedules.


Rotary Airlocks and Slide Gates
Heavy-duty discharge components for continuous powder evacuation from hoppers.


Cleaning System Components
Replacement blow pipes, nozzles, and pneumatic seals matched to the installed cleaning mechanism.

 

 

Frequently Asked Questions

 

 

Q: How do I select the correct airflow capacity for a cartridge dust collector?

A: Required airflow depends on extraction points, enclosure geometry, dust generation rate, process airflow, and ductwork resistance. For systems with multiple extraction points, design considerations must account for simultaneous operating loads. Providing your process description, material characteristics, and operating layout allows our engineering team to calculate accurate sizing parameters.

Q: How do I choose the right filter media for my powder?

A: Media selection depends on particle characteristics, dust loading, temperature, humidity, chemical compatibility, and dust release requirements. Standard polyester media serves general dry applications, while PTFE membrane media is recommended for sticky or hygroscopic powders, and antistatic media is used for static-sensitive powders. Suitability should be confirmed for your specific material.

Q: How does the pulse-jet cleaning system operate?

A: The cleaning system releases short bursts of compressed air through blow pipes and nozzles to dislodge accumulated dust from filter cartridges. Initiation can be controlled by a timer or a differential pressure controller. Operating pressure, pulse duration, and cleaning intervals are adjusted according to filter media and dust properties.

Q: Can the collector be manufactured from stainless steel?

A: Yes. Stainless steel construction (such as 304 or 316) is available for applications requiring corrosion resistance or material compatibility. For food, pharmaceutical, and chemical applications, specific hygiene, surface polish grades, and weld treatments are applied upon review.

Q: How are cartridge filters replaced?

A: Maintenance personnel access the filter elements via designated access doors, loosen the retention hardware, and slide used vertical cartridges out. New cartridges are installed following the reverse sequence. Routine element replacement requires standard maintenance tools and minimal downtime.

Q: What documentation can be supplied with the equipment?

A: Depending on the order scope, documentation includes operation and maintenance manuals, electrical schematics, component lists, recommended spare parts schedules, factory inspection records, and applicable material test certificates.

As one of the most experienced cartridge dust collector manufacturers and suppliers in China, we offer a wide range of products with superior quality. We warmly welcome you to buy customized cartridge dust collector at competitive price from our factory. For more information, contact us now.

Mobile Cartridge Dust Collector, Cartridge Dust Collector
Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!